Our low emission premium polyester gel coat delivers superior cosmetics and durability for parts and molds. Choose from traditional gel coats such as white, neutral, and clear, as well as orange or black tooling gel coats. Or choose from over 900 colors! Fibre Glast offers premium low emission polyester color gel coat that can be perfectly matched every time. Whether you select an RAL favorite, or choose one of 730 custom Instint® colors, these gel coats feature high gloss, UV protection, and blister resistance with excellent adhesive properties. These gel coats are also easy to use and easy to repair. All of our gel coats resist UV degradation and water absorption. To learn more about gel coat please visit our Learning Center articles "Gel Coat Application Guide" and "Gel Coat Troubleshooting Guide".
Shop our selection of polyester resins, gel coats, spray guns, and supplies below!
-
Not every spray application is the same. Why not have one gun that allows you to adjust spray width and volume? Our...
-
You no longer have to invest in high-cost catalyst injector systems to produce high-quality parts. This unique Gel...
-
Acetone is a powerful solvent, used in the composite industry as the standard for cleaning and degreasing. It will...
-
Reduce spills, evaporation, and contamination. Easy-to-squeeze dispensing—Easy to identify. Our 16 oz....
-
For most lamination projects, these affordable latex gloves will last for several hours at a time. They are...
-
Nitrile gloves are excellent general use gloves in a chemical or solvent environment and are an excellent...
-
Composite materials can be dangerous when you're not properly protected. Vapors and splashes can cause unnecessary...
-
Protect against respiratory irritation and potential health issues with this simple safety device. Particles from...
Polyester gel coat is a type of surface coating that is commonly used in the production of composite materials. It is a pigmented resin-based material that is either applied to the surface of a mold before the layup of the composite material or used afterward for finishing, refinishing and repair. Here are some key aspects and characteristics of polyester gel coat:
- Surface Finish: Polyester gel coat provides a smooth and glossy surface finish to composite parts. It helps to enhance the aesthetic appearance of the final product and can be formulated to produce various colors and effects.
- UV Resistance: One of the significant advantages of polyester gel coat is its excellent resistance to UV degradation. It acts as a protective layer, shielding the underlying composite material from the harmful effects of sunlight, such as color fading and surface degradation.
- Chemical Resistance: Polyester gel coat exhibits good resistance to a wide range of chemicals, including acids, alkalis, and solvents. This resistance helps to maintain the integrity and appearance of the composite part when exposed to various chemical environments.
- Impact Resistance: Polyester gel coat provides some degree of impact resistance to the surface of the composite part. It helps to prevent surface damage, such as cracking or chipping, due to impact or abrasion.
- Adhesion to Substrate: Polyester gel coat is designed to adhere well to the substrate, typically a fiberglass or composite material. This adhesion ensures that the gel coat remains firmly attached to the surface and provides a durable protective layer.
- Application and Curing: Polyester gel coat is typically applied by spraying or brushing onto the mold surface before the layup of the composite material. It cures through a chemical reaction, initiated by a catalyst or promoter, to form a solid and durable coating.
- Thickness: The thickness of the gel coat layer can vary depending on the desired application and requirements. Thicker gel coat layers offer increased surface protection but may require additional time for curing.
- Post-Treatment: Once the gel coat has cured, it may require post-treatment processes such as sanding, buffing, or polishing to achieve the desired final finish and smoothness.
Polyester gel coat is widely used in various industries, including automotive, marine, aerospace, construction, and consumer goods. It provides an attractive and protective surface finish to composite parts, enhancing their appearance, durability, and resistance to environmental factors. However, it is important to follow the guidelines for proper application, curing, and maintenance of polyester gel coat to ensure optimal results.
Proper gel coat application can be a challenge for professionals and is probably the most common problem area for those new to composite work. Save yourself some wasted time and material. Before starting your gel coat project, read through the Gel Coat Troubleshooting Guide in our free online Learning Center, to learn what common problems to avoid.
You can place your order right here on our website or, if you have any questions, call 1.800.838.8984 | 8 a.m. - 5 p.m. ET Mon-Fri.