6 oz Plastic Adhesive Primer

Details

Sunrez Plastic Adhesive

Sunrez Plastic adhesive is a UV curable adhesive to promote adhesion to acrylic, OVC, ABS, and other thermoplastics as well as epoxy and polyester composites and several metals. It does not contact any VOCs or HAPs. Sunrez Plastic adhesive cures in the safer UVA range of 365-410nm, such as those found in natural sunlight and the 835-A UV LED light kit.

Full cure will take place in 1-4 minutes when exposed to proper UVA light intensity. Ambient Temperatures of 0-120°F have little effect on the cure time or physical properties. This system will reach 99%+state of cure in under 5 minutes with no high temperature post cure required to reach peak mechanical and thermal properties.

What Is Sunrez Plastic Adhesive?

Sunrez Plastic Adhesive is a UV curable adhesive that promotes adhesion to acrylic, PVC, ABS, and other thermoplastics, as well as to epoxy and polyester composites and several metals. It cures under UV light rather than relying on a measured catalyst or extended cure time, giving the operator full control over when the bond sets. It contains no VOCs or HAPs.

Why Choose Sunrez Plastic Adhesive?

UV cure provides speed and on-demand control. Sunrez Plastic Adhesive reaches full cure in 1 to 4 minutes under proper UVA light intensity and achieves 99% or greater cure in under 5 minutes with no high temperature post-cure required. It cures in the safer UVA range of 365 to 410 nm, the range found in natural sunlight and in the 835-A UV LED Light Kit.

Ambient temperatures from 0°F to 120°F have little effect on cure time or physical properties, so performance is consistent across a wide range of shop conditions.

What Are the Best Applications for Sunrez Plastic Adhesive?

Use to promote adhesion to thermoplastics such as acrylic, PVC, and ABS, to epoxy and polyester composites, and to several metals, particularly where a fast, on-demand cure is required. It pairs naturally with Sunrez UV prepreg systems and the 835-A UV LED Light Kit for UV-cured fabrication work.

How Should Sunrez Plastic Adhesive Be Used for Best Results?

Apply to clean, prepared surfaces. Cure with a UVA source in the 365 to 410 nm range such as natural sunlight or the 835-A UV LED Light Kit for 1 to 4 minutes at proper intensity. Working time is controlled by controlling light exposure.

Technical Specifications

Type: UV curable adhesive, no VOCs or HAPs
Cure light: UVA, 365 to 410 nm (sunlight or 835-A UV LED Light Kit)
Full cure: 1 to 4 minutes at proper UVA intensity; 99%+ cure in under 5 minutes
Post-cure: None required
Temperature tolerance: 0°F to 120°F with little effect on cure or properties
Bonds: Acrylic, PVC, ABS and other thermoplastics, epoxy and polyester composites, several metals